To ensure optimal performance of your machine, perform the following procedures DAILY:

• Open visor cover on the grinding station. Close the cover on the frame scanning station.
  
• Spray the interior of the grinding chamber with surface cleaner (the soap should be a detergent type similar to Formula 409)*
  
• Agitate all interior surfaces with brush including underside of visor cover.
  
• Spray and rinse with clean water, close visor cover.
  
• Spray and wipe dry all exterior surfaces with glass and surface cleaner.
  
• Open the frame scanning station cover.
  
• Inspect the interior surface and the stylus for frame debris. If cleanup is necessary, dampen a cotton swab with glass cleaner and pick-up debris with the swab
  
• Inspect the collection/filter unit to check capacity. The unit MUST be emptied or replaced after edging 100 lenses.

*In the event of hard water build-up, a scale remover such as Lime-Away or similar product should be used. The product should be used in accordance with the individual manufacturer's recommendations and specifications. It is absolutely necessary to follow the directions of the scale remover and rinse thoroughly after use. Repeat the process on a regular basis, as needed.

DON'T FORGET TO SCHEDULE A PREVENTATIVE MAINTENANCE VISIT WITH A BRIOT TECHNICIAN EVERY SIX MONTHS.